N-net Managed Gigabit Ethernet LCD POE Switch
To satisfy the increasing demand of PoE for Gigabit Ethernet (GbE) networking, N-net has developed this series of PoE GbE switch. The NT-35MG22T2GC2GFL-AF24 LCD Gigabit POE Switch provides an ideal solution for LAN implementation. This Managed 24 Ports Poe Switch is equipped with (24)10/100/1000M Base-T Gigabit Ethernet RJ45 ports, supporting IEEE 802.3af/ at standard, and 1000Base-X SFP interfaces. N-net LCD Ethernet PoE switch is designed for video monitoring system and network engineering. Through the scolling data on LCD, it's easily to charge the status of your devices at the first time. The LCD screen shows: 8 ports POE state of a page, the residence time is about 5S, according the real-time displying data to update poe power of PD devices, state monitoring and troubleshooting and so on.
POE Switch 24 Ports Features
Built-in efficient switching core to implement flow control and reduce broadcast packets
Standard Compliance:IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet, IEEE802.3ab Gigabit Ethernet, IEEE802.3x Flow Control, IEEE 802.1p QoS
10/100/1000Mbps auto-negotiation and auto MDI/MDI-X, compatible with various Ethernet devices
Support L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMPSnooping,
DHCP Snooping, LLDP, POE+ management, IP Source Guard, ARP inspection, ACLs etc.
Store-and-forward mechanism is employed to avoid packet loss and error frames
Support spanning tree STP(802.1D) and RSTP(802.1W).
G.8032, support <50ms industrial quick ring protection
Jumbo frames support a maximum of 9.6K kilobtyes
Support cable diagnosis
Support enhanced management through WEB, CLI, TELNET, SSH, SNMP.
0 ºC To 55 ºC operating temperature to meet a variety of complex environments
Copper ports support ESD protection
Support PoE power supply up to maximum of 30W per port
IEEE 802.3af and 802.3at. Supports per port PoE configuration function
Poe Switch For Ip Camera Detailes
Gigabit POE Switch Instruction:
1. Front board have 29 ports, Provide 24x 10/100/1000Mbps downlink PoE Ethernet Ports, 2x 10/100/1000Mbps uplink Ethernet COMBO ports and 2x1000Mbps uplink SFP Ports, and 1x console ports.
2. LED Indicator State:
Power: 1 Green light indicates that the power normal work;
SFP: 2 Green lights indicate that the SFP ports is enable
POE: 24 Green lights indicate that the POE is power on;
Ethernet: 24 Green lights indicate 10/100M Ethernet link and speed;
Ethernet: 24 Green lights indicate 10/100M/1000M Ethernet link and speed;
Please check below device and accessories before installation, if there are missing, please contact with your supplier.
1. PoE Switch 1PCS
2. User Manual 1PCS
◆ Please turn off the signal source and the device's power before installing, installation with power on may damage the device;
◆ Use 24 network cables to connect 24 IP cameras with Ethernet Switch's 1~24 PoE port;
◆ Use network cable to connect Ethernet switch`s UPLINK port with NVR or Other Device;
◆ Connect Ethernet switch with power adapter;
◆ Check if the installation is correct and device is good, make sure all the connection is reliable and power for the system;
◆ Make sure every network device has power supply and work normally.
24 Ports Poe Switch Package
Ethernet Switch Info
Fast Ethernet POE Switch,( 56804734,24) 10/100Mbps downlink PoE Ethernet Ports,( 56804735,4) 10/100/1000Mbps uplink Ethernet Ports, and (4) 1000Mbps uplink SFP Ports, POE output IEEE802.3af standard,420W
Fast Ethernet PoE Switch,( 56804736,24) 10/100Mbps downlink PoE Ethernet Ports,( 56804737,4) 10/100/1000Mbps uplink Ethernet Ports, and (4) 1000Mbps uplink SFP Ports, POE output IEEE802.3at standard,600W
Looking for ideal Managed Gigabit Ethernet POE Switch
Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Managed Ethernet LCD PoE Switch are quality guaranteed. We are China Origin Factory of Gigabit Ethernet LCD PoE Switch. If you have any question, please feel free to contact us.
Product Categories : POE Switch > LCD Ethernet POE Switch